source: doc/Doxyfile@ 579:7d8bd4b502c4

Last change on this file since 579:7d8bd4b502c4 was 579:7d8bd4b502c4, checked in by István Váradi <ivaradi@…>, 10 years ago

Update the Doxygen configuration file to be compatible with the newer version of Doxygen

File size: 100.4 KB
Line 
1# Doxyfile 1.8.8
2
3# This file describes the settings to be used by the documentation system
4# doxygen (www.doxygen.org) for a project.
5#
6# All text after a double hash (##) is considered a comment and is placed in
7# front of the TAG it is preceding.
8#
9# All text after a single hash (#) is considered a comment and will be ignored.
10# The format is:
11# TAG = value [value, ...]
12# For lists, items can also be appended using:
13# TAG += value [value, ...]
14# Values that contain spaces should be placed between quotes (\" \").
15
16#---------------------------------------------------------------------------
17# Project related configuration options
18#---------------------------------------------------------------------------
19
20# This tag specifies the encoding used for all characters in the config file
21# that follow. The default is UTF-8 which is also the encoding used for all text
22# before the first occurrence of this tag. Doxygen uses libiconv (or the iconv
23# built into libc) for the transcoding. See http://www.gnu.org/software/libiconv
24# for the list of possible encodings.
25# The default value is: UTF-8.
26
27DOXYFILE_ENCODING = UTF-8
28
29# The PROJECT_NAME tag is a single word (or a sequence of words surrounded by
30# double-quotes, unless you are using Doxywizard) that should identify the
31# project for which the documentation is generated. This name is used in the
32# title of most generated pages and in a few other places.
33# The default value is: My Project.
34
35PROJECT_NAME = "MAVA Logger X"
36
37# The PROJECT_NUMBER tag can be used to enter a project or revision number. This
38# could be handy for archiving the generated documentation or if some version
39# control system is used.
40
41PROJECT_NUMBER =
42
43# Using the PROJECT_BRIEF tag one can provide an optional one line description
44# for a project that appears at the top of each page and should give viewer a
45# quick idea about the purpose of the project. Keep the description short.
46
47PROJECT_BRIEF =
48
49# With the PROJECT_LOGO tag one can specify an logo or icon that is included in
50# the documentation. The maximum height of the logo should not exceed 55 pixels
51# and the maximum width should not exceed 200 pixels. Doxygen will copy the logo
52# to the output directory.
53
54PROJECT_LOGO =
55
56# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) path
57# into which the generated documentation will be written. If a relative path is
58# entered, it will be relative to the location where doxygen was started. If
59# left blank the current directory will be used.
60
61OUTPUT_DIRECTORY =
62
63# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create 4096 sub-
64# directories (in 2 levels) under the output directory of each output format and
65# will distribute the generated files over these directories. Enabling this
66# option can be useful when feeding doxygen a huge amount of source files, where
67# putting all generated files in the same directory would otherwise causes
68# performance problems for the file system.
69# The default value is: NO.
70
71CREATE_SUBDIRS = NO
72
73# If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
74# characters to appear in the names of generated files. If set to NO, non-ASCII
75# characters will be escaped, for example _xE3_x81_x84 will be used for Unicode
76# U+3044.
77# The default value is: NO.
78
79ALLOW_UNICODE_NAMES = NO
80
81# The OUTPUT_LANGUAGE tag is used to specify the language in which all
82# documentation generated by doxygen is written. Doxygen will use this
83# information to generate all constant output in the proper language.
84# Possible values are: Afrikaans, Arabic, Armenian, Brazilian, Catalan, Chinese,
85# Chinese-Traditional, Croatian, Czech, Danish, Dutch, English (United States),
86# Esperanto, Farsi (Persian), Finnish, French, German, Greek, Hungarian,
87# Indonesian, Italian, Japanese, Japanese-en (Japanese with English messages),
88# Korean, Korean-en (Korean with English messages), Latvian, Lithuanian,
89# Macedonian, Norwegian, Persian (Farsi), Polish, Portuguese, Romanian, Russian,
90# Serbian, Serbian-Cyrillic, Slovak, Slovene, Spanish, Swedish, Turkish,
91# Ukrainian and Vietnamese.
92# The default value is: English.
93
94OUTPUT_LANGUAGE = English
95
96# If the BRIEF_MEMBER_DESC tag is set to YES doxygen will include brief member
97# descriptions after the members that are listed in the file and class
98# documentation (similar to Javadoc). Set to NO to disable this.
99# The default value is: YES.
100
101BRIEF_MEMBER_DESC = YES
102
103# If the REPEAT_BRIEF tag is set to YES doxygen will prepend the brief
104# description of a member or function before the detailed description
105#
106# Note: If both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the
107# brief descriptions will be completely suppressed.
108# The default value is: YES.
109
110REPEAT_BRIEF = YES
111
112# This tag implements a quasi-intelligent brief description abbreviator that is
113# used to form the text in various listings. Each string in this list, if found
114# as the leading text of the brief description, will be stripped from the text
115# and the result, after processing the whole list, is used as the annotated
116# text. Otherwise, the brief description is used as-is. If left blank, the
117# following values are used ($name is automatically replaced with the name of
118# the entity):The $name class, The $name widget, The $name file, is, provides,
119# specifies, contains, represents, a, an and the.
120
121ABBREVIATE_BRIEF =
122
123# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then
124# doxygen will generate a detailed section even if there is only a brief
125# description.
126# The default value is: NO.
127
128ALWAYS_DETAILED_SEC = NO
129
130# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
131# inherited members of a class in the documentation of that class as if those
132# members were ordinary class members. Constructors, destructors and assignment
133# operators of the base classes will not be shown.
134# The default value is: NO.
135
136INLINE_INHERITED_MEMB = NO
137
138# If the FULL_PATH_NAMES tag is set to YES doxygen will prepend the full path
139# before files name in the file list and in the header files. If set to NO the
140# shortest path that makes the file name unique will be used
141# The default value is: YES.
142
143FULL_PATH_NAMES = NO
144
145# The STRIP_FROM_PATH tag can be used to strip a user-defined part of the path.
146# Stripping is only done if one of the specified strings matches the left-hand
147# part of the path. The tag can be used to show relative paths in the file list.
148# If left blank the directory from which doxygen is run is used as the path to
149# strip.
150#
151# Note that you can specify absolute paths here, but also relative paths, which
152# will be relative from the directory where doxygen is started.
153# This tag requires that the tag FULL_PATH_NAMES is set to YES.
154
155STRIP_FROM_PATH =
156
157# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of the
158# path mentioned in the documentation of a class, which tells the reader which
159# header file to include in order to use a class. If left blank only the name of
160# the header file containing the class definition is used. Otherwise one should
161# specify the list of include paths that are normally passed to the compiler
162# using the -I flag.
163
164STRIP_FROM_INC_PATH =
165
166# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
167# less readable) file names. This can be useful is your file systems doesn't
168# support long names like on DOS, Mac, or CD-ROM.
169# The default value is: NO.
170
171SHORT_NAMES = NO
172
173# If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
174# first line (until the first dot) of a Javadoc-style comment as the brief
175# description. If set to NO, the Javadoc-style will behave just like regular Qt-
176# style comments (thus requiring an explicit @brief command for a brief
177# description.)
178# The default value is: NO.
179
180JAVADOC_AUTOBRIEF = NO
181
182# If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
183# line (until the first dot) of a Qt-style comment as the brief description. If
184# set to NO, the Qt-style will behave just like regular Qt-style comments (thus
185# requiring an explicit \brief command for a brief description.)
186# The default value is: NO.
187
188QT_AUTOBRIEF = NO
189
190# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
191# multi-line C++ special comment block (i.e. a block of //! or /// comments) as
192# a brief description. This used to be the default behavior. The new default is
193# to treat a multi-line C++ comment block as a detailed description. Set this
194# tag to YES if you prefer the old behavior instead.
195#
196# Note that setting this tag to YES also means that rational rose comments are
197# not recognized any more.
198# The default value is: NO.
199
200MULTILINE_CPP_IS_BRIEF = NO
201
202# If the INHERIT_DOCS tag is set to YES then an undocumented member inherits the
203# documentation from any documented member that it re-implements.
204# The default value is: YES.
205
206INHERIT_DOCS = YES
207
208# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce a
209# new page for each member. If set to NO, the documentation of a member will be
210# part of the file/class/namespace that contains it.
211# The default value is: NO.
212
213SEPARATE_MEMBER_PAGES = NO
214
215# The TAB_SIZE tag can be used to set the number of spaces in a tab. Doxygen
216# uses this value to replace tabs by spaces in code fragments.
217# Minimum value: 1, maximum value: 16, default value: 4.
218
219TAB_SIZE = 8
220
221# This tag can be used to specify a number of aliases that act as commands in
222# the documentation. An alias has the form:
223# name=value
224# For example adding
225# "sideeffect=@par Side Effects:\n"
226# will allow you to put the command \sideeffect (or @sideeffect) in the
227# documentation, which will result in a user-defined paragraph with heading
228# "Side Effects:". You can put \n's in the value part of an alias to insert
229# newlines.
230
231ALIASES =
232
233# This tag can be used to specify a number of word-keyword mappings (TCL only).
234# A mapping has the form "name=value". For example adding "class=itcl::class"
235# will allow you to use the command class in the itcl::class meaning.
236
237TCL_SUBST =
238
239# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources
240# only. Doxygen will then generate output that is more tailored for C. For
241# instance, some of the names that are used will be different. The list of all
242# members will be omitted, etc.
243# The default value is: NO.
244
245OPTIMIZE_OUTPUT_FOR_C = NO
246
247# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java or
248# Python sources only. Doxygen will then generate output that is more tailored
249# for that language. For instance, namespaces will be presented as packages,
250# qualified scopes will look different, etc.
251# The default value is: NO.
252
253OPTIMIZE_OUTPUT_JAVA = NO
254
255# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran
256# sources. Doxygen will then generate output that is tailored for Fortran.
257# The default value is: NO.
258
259OPTIMIZE_FOR_FORTRAN = NO
260
261# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL
262# sources. Doxygen will then generate output that is tailored for VHDL.
263# The default value is: NO.
264
265OPTIMIZE_OUTPUT_VHDL = NO
266
267# Doxygen selects the parser to use depending on the extension of the files it
268# parses. With this tag you can assign which parser to use for a given
269# extension. Doxygen has a built-in mapping, but you can override or extend it
270# using this tag. The format is ext=language, where ext is a file extension, and
271# language is one of the parsers supported by doxygen: IDL, Java, Javascript,
272# C#, C, C++, D, PHP, Objective-C, Python, Fortran (fixed format Fortran:
273# FortranFixed, free formatted Fortran: FortranFree, unknown formatted Fortran:
274# Fortran. In the later case the parser tries to guess whether the code is fixed
275# or free formatted code, this is the default for Fortran type files), VHDL. For
276# instance to make doxygen treat .inc files as Fortran files (default is PHP),
277# and .f files as C (default is Fortran), use: inc=Fortran f=C.
278#
279# Note For files without extension you can use no_extension as a placeholder.
280#
281# Note that for custom extensions you also need to set FILE_PATTERNS otherwise
282# the files are not read by doxygen.
283
284EXTENSION_MAPPING =
285
286# If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
287# according to the Markdown format, which allows for more readable
288# documentation. See http://daringfireball.net/projects/markdown/ for details.
289# The output of markdown processing is further processed by doxygen, so you can
290# mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
291# case of backward compatibilities issues.
292# The default value is: YES.
293
294MARKDOWN_SUPPORT = YES
295
296# When enabled doxygen tries to link words that correspond to documented
297# classes, or namespaces to their corresponding documentation. Such a link can
298# be prevented in individual cases by by putting a % sign in front of the word
299# or globally by setting AUTOLINK_SUPPORT to NO.
300# The default value is: YES.
301
302AUTOLINK_SUPPORT = YES
303
304# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want
305# to include (a tag file for) the STL sources as input, then you should set this
306# tag to YES in order to let doxygen match functions declarations and
307# definitions whose arguments contain STL classes (e.g. func(std::string);
308# versus func(std::string) {}). This also make the inheritance and collaboration
309# diagrams that involve STL classes more complete and accurate.
310# The default value is: NO.
311
312BUILTIN_STL_SUPPORT = NO
313
314# If you use Microsoft's C++/CLI language, you should set this option to YES to
315# enable parsing support.
316# The default value is: NO.
317
318CPP_CLI_SUPPORT = NO
319
320# Set the SIP_SUPPORT tag to YES if your project consists of sip (see:
321# http://www.riverbankcomputing.co.uk/software/sip/intro) sources only. Doxygen
322# will parse them like normal C++ but will assume all classes use public instead
323# of private inheritance when no explicit protection keyword is present.
324# The default value is: NO.
325
326SIP_SUPPORT = NO
327
328# For Microsoft's IDL there are propget and propput attributes to indicate
329# getter and setter methods for a property. Setting this option to YES will make
330# doxygen to replace the get and set methods by a property in the documentation.
331# This will only work if the methods are indeed getting or setting a simple
332# type. If this is not the case, or you want to show the methods anyway, you
333# should set this option to NO.
334# The default value is: YES.
335
336IDL_PROPERTY_SUPPORT = YES
337
338# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC
339# tag is set to YES, then doxygen will reuse the documentation of the first
340# member in the group (if any) for the other members of the group. By default
341# all members of a group must be documented explicitly.
342# The default value is: NO.
343
344DISTRIBUTE_GROUP_DOC = NO
345
346# Set the SUBGROUPING tag to YES to allow class member groups of the same type
347# (for instance a group of public functions) to be put as a subgroup of that
348# type (e.g. under the Public Functions section). Set it to NO to prevent
349# subgrouping. Alternatively, this can be done per class using the
350# \nosubgrouping command.
351# The default value is: YES.
352
353SUBGROUPING = YES
354
355# When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and unions
356# are shown inside the group in which they are included (e.g. using \ingroup)
357# instead of on a separate page (for HTML and Man pages) or section (for LaTeX
358# and RTF).
359#
360# Note that this feature does not work in combination with
361# SEPARATE_MEMBER_PAGES.
362# The default value is: NO.
363
364INLINE_GROUPED_CLASSES = NO
365
366# When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and unions
367# with only public data fields or simple typedef fields will be shown inline in
368# the documentation of the scope in which they are defined (i.e. file,
369# namespace, or group documentation), provided this scope is documented. If set
370# to NO, structs, classes, and unions are shown on a separate page (for HTML and
371# Man pages) or section (for LaTeX and RTF).
372# The default value is: NO.
373
374INLINE_SIMPLE_STRUCTS = NO
375
376# When TYPEDEF_HIDES_STRUCT tag is enabled, a typedef of a struct, union, or
377# enum is documented as struct, union, or enum with the name of the typedef. So
378# typedef struct TypeS {} TypeT, will appear in the documentation as a struct
379# with name TypeT. When disabled the typedef will appear as a member of a file,
380# namespace, or class. And the struct will be named TypeS. This can typically be
381# useful for C code in case the coding convention dictates that all compound
382# types are typedef'ed and only the typedef is referenced, never the tag name.
383# The default value is: NO.
384
385TYPEDEF_HIDES_STRUCT = NO
386
387# The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This
388# cache is used to resolve symbols given their name and scope. Since this can be
389# an expensive process and often the same symbol appears multiple times in the
390# code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
391# doxygen will become slower. If the cache is too large, memory is wasted. The
392# cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid range
393# is 0..9, the default is 0, corresponding to a cache size of 2^16=65536
394# symbols. At the end of a run doxygen will report the cache usage and suggest
395# the optimal cache size from a speed point of view.
396# Minimum value: 0, maximum value: 9, default value: 0.
397
398LOOKUP_CACHE_SIZE = 0
399
400#---------------------------------------------------------------------------
401# Build related configuration options
402#---------------------------------------------------------------------------
403
404# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in
405# documentation are documented, even if no documentation was available. Private
406# class members and static file members will be hidden unless the
407# EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES.
408# Note: This will also disable the warnings about undocumented members that are
409# normally produced when WARNINGS is set to YES.
410# The default value is: NO.
411
412EXTRACT_ALL = NO
413
414# If the EXTRACT_PRIVATE tag is set to YES all private members of a class will
415# be included in the documentation.
416# The default value is: NO.
417
418EXTRACT_PRIVATE = YES
419
420# If the EXTRACT_PACKAGE tag is set to YES all members with package or internal
421# scope will be included in the documentation.
422# The default value is: NO.
423
424EXTRACT_PACKAGE = NO
425
426# If the EXTRACT_STATIC tag is set to YES all static members of a file will be
427# included in the documentation.
428# The default value is: NO.
429
430EXTRACT_STATIC = NO
431
432# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) defined
433# locally in source files will be included in the documentation. If set to NO
434# only classes defined in header files are included. Does not have any effect
435# for Java sources.
436# The default value is: YES.
437
438EXTRACT_LOCAL_CLASSES = YES
439
440# This flag is only useful for Objective-C code. When set to YES local methods,
441# which are defined in the implementation section but not in the interface are
442# included in the documentation. If set to NO only methods in the interface are
443# included.
444# The default value is: NO.
445
446EXTRACT_LOCAL_METHODS = NO
447
448# If this flag is set to YES, the members of anonymous namespaces will be
449# extracted and appear in the documentation as a namespace called
450# 'anonymous_namespace{file}', where file will be replaced with the base name of
451# the file that contains the anonymous namespace. By default anonymous namespace
452# are hidden.
453# The default value is: NO.
454
455EXTRACT_ANON_NSPACES = NO
456
457# If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
458# undocumented members inside documented classes or files. If set to NO these
459# members will be included in the various overviews, but no documentation
460# section is generated. This option has no effect if EXTRACT_ALL is enabled.
461# The default value is: NO.
462
463HIDE_UNDOC_MEMBERS = NO
464
465# If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
466# undocumented classes that are normally visible in the class hierarchy. If set
467# to NO these classes will be included in the various overviews. This option has
468# no effect if EXTRACT_ALL is enabled.
469# The default value is: NO.
470
471HIDE_UNDOC_CLASSES = NO
472
473# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
474# (class|struct|union) declarations. If set to NO these declarations will be
475# included in the documentation.
476# The default value is: NO.
477
478HIDE_FRIEND_COMPOUNDS = NO
479
480# If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
481# documentation blocks found inside the body of a function. If set to NO these
482# blocks will be appended to the function's detailed documentation block.
483# The default value is: NO.
484
485HIDE_IN_BODY_DOCS = NO
486
487# The INTERNAL_DOCS tag determines if documentation that is typed after a
488# \internal command is included. If the tag is set to NO then the documentation
489# will be excluded. Set it to YES to include the internal documentation.
490# The default value is: NO.
491
492INTERNAL_DOCS = NO
493
494# If the CASE_SENSE_NAMES tag is set to NO then doxygen will only generate file
495# names in lower-case letters. If set to YES upper-case letters are also
496# allowed. This is useful if you have classes or files whose names only differ
497# in case and if your file system supports case sensitive file names. Windows
498# and Mac users are advised to set this option to NO.
499# The default value is: system dependent.
500
501CASE_SENSE_NAMES = YES
502
503# If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
504# their full class and namespace scopes in the documentation. If set to YES the
505# scope will be hidden.
506# The default value is: NO.
507
508HIDE_SCOPE_NAMES = NO
509
510# If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
511# the files that are included by a file in the documentation of that file.
512# The default value is: YES.
513
514SHOW_INCLUDE_FILES = YES
515
516# If the SHOW_GROUPED_MEMB_INC tag is set to YES then Doxygen will add for each
517# grouped member an include statement to the documentation, telling the reader
518# which file to include in order to use the member.
519# The default value is: NO.
520
521SHOW_GROUPED_MEMB_INC = NO
522
523# If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
524# files with double quotes in the documentation rather than with sharp brackets.
525# The default value is: NO.
526
527FORCE_LOCAL_INCLUDES = NO
528
529# If the INLINE_INFO tag is set to YES then a tag [inline] is inserted in the
530# documentation for inline members.
531# The default value is: YES.
532
533INLINE_INFO = YES
534
535# If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
536# (detailed) documentation of file and class members alphabetically by member
537# name. If set to NO the members will appear in declaration order.
538# The default value is: YES.
539
540SORT_MEMBER_DOCS = YES
541
542# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
543# descriptions of file, namespace and class members alphabetically by member
544# name. If set to NO the members will appear in declaration order. Note that
545# this will also influence the order of the classes in the class list.
546# The default value is: NO.
547
548SORT_BRIEF_DOCS = NO
549
550# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
551# (brief and detailed) documentation of class members so that constructors and
552# destructors are listed first. If set to NO the constructors will appear in the
553# respective orders defined by SORT_BRIEF_DOCS and SORT_MEMBER_DOCS.
554# Note: If SORT_BRIEF_DOCS is set to NO this option is ignored for sorting brief
555# member documentation.
556# Note: If SORT_MEMBER_DOCS is set to NO this option is ignored for sorting
557# detailed member documentation.
558# The default value is: NO.
559
560SORT_MEMBERS_CTORS_1ST = NO
561
562# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
563# of group names into alphabetical order. If set to NO the group names will
564# appear in their defined order.
565# The default value is: NO.
566
567SORT_GROUP_NAMES = NO
568
569# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be sorted by
570# fully-qualified names, including namespaces. If set to NO, the class list will
571# be sorted only by class name, not including the namespace part.
572# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.
573# Note: This option applies only to the class list, not to the alphabetical
574# list.
575# The default value is: NO.
576
577SORT_BY_SCOPE_NAME = NO
578
579# If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
580# type resolution of all parameters of a function it will reject a match between
581# the prototype and the implementation of a member function even if there is
582# only one candidate or it is obvious which candidate to choose by doing a
583# simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
584# accept a match between prototype and implementation in such cases.
585# The default value is: NO.
586
587STRICT_PROTO_MATCHING = NO
588
589# The GENERATE_TODOLIST tag can be used to enable ( YES) or disable ( NO) the
590# todo list. This list is created by putting \todo commands in the
591# documentation.
592# The default value is: YES.
593
594GENERATE_TODOLIST = YES
595
596# The GENERATE_TESTLIST tag can be used to enable ( YES) or disable ( NO) the
597# test list. This list is created by putting \test commands in the
598# documentation.
599# The default value is: YES.
600
601GENERATE_TESTLIST = YES
602
603# The GENERATE_BUGLIST tag can be used to enable ( YES) or disable ( NO) the bug
604# list. This list is created by putting \bug commands in the documentation.
605# The default value is: YES.
606
607GENERATE_BUGLIST = YES
608
609# The GENERATE_DEPRECATEDLIST tag can be used to enable ( YES) or disable ( NO)
610# the deprecated list. This list is created by putting \deprecated commands in
611# the documentation.
612# The default value is: YES.
613
614GENERATE_DEPRECATEDLIST= YES
615
616# The ENABLED_SECTIONS tag can be used to enable conditional documentation
617# sections, marked by \if <section_label> ... \endif and \cond <section_label>
618# ... \endcond blocks.
619
620ENABLED_SECTIONS =
621
622# The MAX_INITIALIZER_LINES tag determines the maximum number of lines that the
623# initial value of a variable or macro / define can have for it to appear in the
624# documentation. If the initializer consists of more lines than specified here
625# it will be hidden. Use a value of 0 to hide initializers completely. The
626# appearance of the value of individual variables and macros / defines can be
627# controlled using \showinitializer or \hideinitializer command in the
628# documentation regardless of this setting.
629# Minimum value: 0, maximum value: 10000, default value: 30.
630
631MAX_INITIALIZER_LINES = 30
632
633# Set the SHOW_USED_FILES tag to NO to disable the list of files generated at
634# the bottom of the documentation of classes and structs. If set to YES the list
635# will mention the files that were used to generate the documentation.
636# The default value is: YES.
637
638SHOW_USED_FILES = YES
639
640# Set the SHOW_FILES tag to NO to disable the generation of the Files page. This
641# will remove the Files entry from the Quick Index and from the Folder Tree View
642# (if specified).
643# The default value is: YES.
644
645SHOW_FILES = YES
646
647# Set the SHOW_NAMESPACES tag to NO to disable the generation of the Namespaces
648# page. This will remove the Namespaces entry from the Quick Index and from the
649# Folder Tree View (if specified).
650# The default value is: YES.
651
652SHOW_NAMESPACES = YES
653
654# The FILE_VERSION_FILTER tag can be used to specify a program or script that
655# doxygen should invoke to get the current version for each file (typically from
656# the version control system). Doxygen will invoke the program by executing (via
657# popen()) the command command input-file, where command is the value of the
658# FILE_VERSION_FILTER tag, and input-file is the name of an input file provided
659# by doxygen. Whatever the program writes to standard output is used as the file
660# version. For an example see the documentation.
661
662FILE_VERSION_FILTER =
663
664# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed
665# by doxygen. The layout file controls the global structure of the generated
666# output files in an output format independent way. To create the layout file
667# that represents doxygen's defaults, run doxygen with the -l option. You can
668# optionally specify a file name after the option, if omitted DoxygenLayout.xml
669# will be used as the name of the layout file.
670#
671# Note that if you run doxygen from a directory containing a file called
672# DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
673# tag is left empty.
674
675LAYOUT_FILE =
676
677# The CITE_BIB_FILES tag can be used to specify one or more bib files containing
678# the reference definitions. This must be a list of .bib files. The .bib
679# extension is automatically appended if omitted. This requires the bibtex tool
680# to be installed. See also http://en.wikipedia.org/wiki/BibTeX for more info.
681# For LaTeX the style of the bibliography can be controlled using
682# LATEX_BIB_STYLE. To use this feature you need bibtex and perl available in the
683# search path. See also \cite for info how to create references.
684
685CITE_BIB_FILES =
686
687#---------------------------------------------------------------------------
688# Configuration options related to warning and progress messages
689#---------------------------------------------------------------------------
690
691# The QUIET tag can be used to turn on/off the messages that are generated to
692# standard output by doxygen. If QUIET is set to YES this implies that the
693# messages are off.
694# The default value is: NO.
695
696QUIET = YES
697
698# The WARNINGS tag can be used to turn on/off the warning messages that are
699# generated to standard error ( stderr) by doxygen. If WARNINGS is set to YES
700# this implies that the warnings are on.
701#
702# Tip: Turn warnings on while writing the documentation.
703# The default value is: YES.
704
705WARNINGS = YES
706
707# If the WARN_IF_UNDOCUMENTED tag is set to YES, then doxygen will generate
708# warnings for undocumented members. If EXTRACT_ALL is set to YES then this flag
709# will automatically be disabled.
710# The default value is: YES.
711
712WARN_IF_UNDOCUMENTED = YES
713
714# If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
715# potential errors in the documentation, such as not documenting some parameters
716# in a documented function, or documenting parameters that don't exist or using
717# markup commands wrongly.
718# The default value is: YES.
719
720WARN_IF_DOC_ERROR = YES
721
722# This WARN_NO_PARAMDOC option can be enabled to get warnings for functions that
723# are documented, but have no documentation for their parameters or return
724# value. If set to NO doxygen will only warn about wrong or incomplete parameter
725# documentation, but not about the absence of documentation.
726# The default value is: NO.
727
728WARN_NO_PARAMDOC = NO
729
730# The WARN_FORMAT tag determines the format of the warning messages that doxygen
731# can produce. The string should contain the $file, $line, and $text tags, which
732# will be replaced by the file and line number from which the warning originated
733# and the warning text. Optionally the format may contain $version, which will
734# be replaced by the version of the file (if it could be obtained via
735# FILE_VERSION_FILTER)
736# The default value is: $file:$line: $text.
737
738WARN_FORMAT = "$file:$line: $text"
739
740# The WARN_LOGFILE tag can be used to specify a file to which warning and error
741# messages should be written. If left blank the output is written to standard
742# error (stderr).
743
744WARN_LOGFILE =
745
746#---------------------------------------------------------------------------
747# Configuration options related to the input files
748#---------------------------------------------------------------------------
749
750# The INPUT tag is used to specify the files and/or directories that contain
751# documented source files. You may enter file names like myfile.cpp or
752# directories like /usr/src/myproject. Separate the files or directories with
753# spaces.
754# Note: If this tag is empty the current directory is searched.
755
756INPUT = overview.dox \
757 ../src/mlx \
758 ../src/mlx/gui
759
760# This tag can be used to specify the character encoding of the source files
761# that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
762# libiconv (or the iconv built into libc) for the transcoding. See the libiconv
763# documentation (see: http://www.gnu.org/software/libiconv) for the list of
764# possible encodings.
765# The default value is: UTF-8.
766
767INPUT_ENCODING = UTF-8
768
769# If the value of the INPUT tag contains directories, you can use the
770# FILE_PATTERNS tag to specify one or more wildcard patterns (like *.cpp and
771# *.h) to filter out the source-files in the directories. If left blank the
772# following patterns are tested:*.c, *.cc, *.cxx, *.cpp, *.c++, *.java, *.ii,
773# *.ixx, *.ipp, *.i++, *.inl, *.idl, *.ddl, *.odl, *.h, *.hh, *.hxx, *.hpp,
774# *.h++, *.cs, *.d, *.php, *.php4, *.php5, *.phtml, *.inc, *.m, *.markdown,
775# *.md, *.mm, *.dox, *.py, *.f90, *.f, *.for, *.tcl, *.vhd, *.vhdl, *.ucf,
776# *.qsf, *.as and *.js.
777
778FILE_PATTERNS = *.py
779
780# The RECURSIVE tag can be used to specify whether or not subdirectories should
781# be searched for input files as well.
782# The default value is: NO.
783
784RECURSIVE = NO
785
786# The EXCLUDE tag can be used to specify files and/or directories that should be
787# excluded from the INPUT source files. This way you can easily exclude a
788# subdirectory from a directory tree whose root is specified with the INPUT tag.
789#
790# Note that relative paths are relative to the directory from which doxygen is
791# run.
792
793EXCLUDE =
794
795# The EXCLUDE_SYMLINKS tag can be used to select whether or not files or
796# directories that are symbolic links (a Unix file system feature) are excluded
797# from the input.
798# The default value is: NO.
799
800EXCLUDE_SYMLINKS = NO
801
802# If the value of the INPUT tag contains directories, you can use the
803# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude
804# certain files from those directories.
805#
806# Note that the wildcards are matched against the file with absolute path, so to
807# exclude all test directories for example use the pattern */test/*
808
809EXCLUDE_PATTERNS =
810
811# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names
812# (namespaces, classes, functions, etc.) that should be excluded from the
813# output. The symbol name can be a fully qualified name, a word, or if the
814# wildcard * is used, a substring. Examples: ANamespace, AClass,
815# AClass::ANamespace, ANamespace::*Test
816#
817# Note that the wildcards are matched against the file with absolute path, so to
818# exclude all test directories use the pattern */test/*
819
820EXCLUDE_SYMBOLS =
821
822# The EXAMPLE_PATH tag can be used to specify one or more files or directories
823# that contain example code fragments that are included (see the \include
824# command).
825
826EXAMPLE_PATH =
827
828# If the value of the EXAMPLE_PATH tag contains directories, you can use the
829# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp and
830# *.h) to filter out the source-files in the directories. If left blank all
831# files are included.
832
833EXAMPLE_PATTERNS =
834
835# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be
836# searched for input files to be used with the \include or \dontinclude commands
837# irrespective of the value of the RECURSIVE tag.
838# The default value is: NO.
839
840EXAMPLE_RECURSIVE = NO
841
842# The IMAGE_PATH tag can be used to specify one or more files or directories
843# that contain images that are to be included in the documentation (see the
844# \image command).
845
846IMAGE_PATH =
847
848# The INPUT_FILTER tag can be used to specify a program that doxygen should
849# invoke to filter for each input file. Doxygen will invoke the filter program
850# by executing (via popen()) the command:
851#
852# <filter> <input-file>
853#
854# where <filter> is the value of the INPUT_FILTER tag, and <input-file> is the
855# name of an input file. Doxygen will then use the output that the filter
856# program writes to standard output. If FILTER_PATTERNS is specified, this tag
857# will be ignored.
858#
859# Note that the filter must not add or remove lines; it is applied before the
860# code is scanned, but not when the output code is generated. If lines are added
861# or removed, the anchors will not be placed correctly.
862
863INPUT_FILTER =
864
865# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern
866# basis. Doxygen will compare the file name with each pattern and apply the
867# filter if there is a match. The filters are a list of the form: pattern=filter
868# (like *.cpp=my_cpp_filter). See INPUT_FILTER for further information on how
869# filters are used. If the FILTER_PATTERNS tag is empty or if none of the
870# patterns match the file name, INPUT_FILTER is applied.
871
872FILTER_PATTERNS =
873
874# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using
875# INPUT_FILTER ) will also be used to filter the input files that are used for
876# producing the source files to browse (i.e. when SOURCE_BROWSER is set to YES).
877# The default value is: NO.
878
879FILTER_SOURCE_FILES = NO
880
881# The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file
882# pattern. A pattern will override the setting for FILTER_PATTERN (if any) and
883# it is also possible to disable source filtering for a specific pattern using
884# *.ext= (so without naming a filter).
885# This tag requires that the tag FILTER_SOURCE_FILES is set to YES.
886
887FILTER_SOURCE_PATTERNS =
888
889# If the USE_MDFILE_AS_MAINPAGE tag refers to the name of a markdown file that
890# is part of the input, its contents will be placed on the main page
891# (index.html). This can be useful if you have a project on for instance GitHub
892# and want to reuse the introduction page also for the doxygen output.
893
894USE_MDFILE_AS_MAINPAGE =
895
896#---------------------------------------------------------------------------
897# Configuration options related to source browsing
898#---------------------------------------------------------------------------
899
900# If the SOURCE_BROWSER tag is set to YES then a list of source files will be
901# generated. Documented entities will be cross-referenced with these sources.
902#
903# Note: To get rid of all source code in the generated output, make sure that
904# also VERBATIM_HEADERS is set to NO.
905# The default value is: NO.
906
907SOURCE_BROWSER = YES
908
909# Setting the INLINE_SOURCES tag to YES will include the body of functions,
910# classes and enums directly into the documentation.
911# The default value is: NO.
912
913INLINE_SOURCES = NO
914
915# Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
916# special comment blocks from generated source code fragments. Normal C, C++ and
917# Fortran comments will always remain visible.
918# The default value is: YES.
919
920STRIP_CODE_COMMENTS = YES
921
922# If the REFERENCED_BY_RELATION tag is set to YES then for each documented
923# function all documented functions referencing it will be listed.
924# The default value is: NO.
925
926REFERENCED_BY_RELATION = NO
927
928# If the REFERENCES_RELATION tag is set to YES then for each documented function
929# all documented entities called/used by that function will be listed.
930# The default value is: NO.
931
932REFERENCES_RELATION = NO
933
934# If the REFERENCES_LINK_SOURCE tag is set to YES and SOURCE_BROWSER tag is set
935# to YES, then the hyperlinks from functions in REFERENCES_RELATION and
936# REFERENCED_BY_RELATION lists will link to the source code. Otherwise they will
937# link to the documentation.
938# The default value is: YES.
939
940REFERENCES_LINK_SOURCE = YES
941
942# If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the
943# source code will show a tooltip with additional information such as prototype,
944# brief description and links to the definition and documentation. Since this
945# will make the HTML file larger and loading of large files a bit slower, you
946# can opt to disable this feature.
947# The default value is: YES.
948# This tag requires that the tag SOURCE_BROWSER is set to YES.
949
950SOURCE_TOOLTIPS = YES
951
952# If the USE_HTAGS tag is set to YES then the references to source code will
953# point to the HTML generated by the htags(1) tool instead of doxygen built-in
954# source browser. The htags tool is part of GNU's global source tagging system
955# (see http://www.gnu.org/software/global/global.html). You will need version
956# 4.8.6 or higher.
957#
958# To use it do the following:
959# - Install the latest version of global
960# - Enable SOURCE_BROWSER and USE_HTAGS in the config file
961# - Make sure the INPUT points to the root of the source tree
962# - Run doxygen as normal
963#
964# Doxygen will invoke htags (and that will in turn invoke gtags), so these
965# tools must be available from the command line (i.e. in the search path).
966#
967# The result: instead of the source browser generated by doxygen, the links to
968# source code will now point to the output of htags.
969# The default value is: NO.
970# This tag requires that the tag SOURCE_BROWSER is set to YES.
971
972USE_HTAGS = NO
973
974# If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
975# verbatim copy of the header file for each class for which an include is
976# specified. Set to NO to disable this.
977# See also: Section \class.
978# The default value is: YES.
979
980VERBATIM_HEADERS = YES
981
982# If the CLANG_ASSISTED_PARSING tag is set to YES, then doxygen will use the
983# clang parser (see: http://clang.llvm.org/) for more accurate parsing at the
984# cost of reduced performance. This can be particularly helpful with template
985# rich C++ code for which doxygen's built-in parser lacks the necessary type
986# information.
987# Note: The availability of this option depends on whether or not doxygen was
988# compiled with the --with-libclang option.
989# The default value is: NO.
990
991CLANG_ASSISTED_PARSING = NO
992
993# If clang assisted parsing is enabled you can provide the compiler with command
994# line options that you would normally use when invoking the compiler. Note that
995# the include paths will already be set by doxygen for the files and directories
996# specified with INPUT and INCLUDE_PATH.
997# This tag requires that the tag CLANG_ASSISTED_PARSING is set to YES.
998
999CLANG_OPTIONS =
1000
1001#---------------------------------------------------------------------------
1002# Configuration options related to the alphabetical class index
1003#---------------------------------------------------------------------------
1004
1005# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index of all
1006# compounds will be generated. Enable this if the project contains a lot of
1007# classes, structs, unions or interfaces.
1008# The default value is: YES.
1009
1010ALPHABETICAL_INDEX = YES
1011
1012# The COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns in
1013# which the alphabetical index list will be split.
1014# Minimum value: 1, maximum value: 20, default value: 5.
1015# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
1016
1017COLS_IN_ALPHA_INDEX = 5
1018
1019# In case all classes in a project start with a common prefix, all classes will
1020# be put under the same header in the alphabetical index. The IGNORE_PREFIX tag
1021# can be used to specify a prefix (or a list of prefixes) that should be ignored
1022# while generating the index headers.
1023# This tag requires that the tag ALPHABETICAL_INDEX is set to YES.
1024
1025IGNORE_PREFIX =
1026
1027#---------------------------------------------------------------------------
1028# Configuration options related to the HTML output
1029#---------------------------------------------------------------------------
1030
1031# If the GENERATE_HTML tag is set to YES doxygen will generate HTML output
1032# The default value is: YES.
1033
1034GENERATE_HTML = YES
1035
1036# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. If a
1037# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1038# it.
1039# The default directory is: html.
1040# This tag requires that the tag GENERATE_HTML is set to YES.
1041
1042HTML_OUTPUT = html
1043
1044# The HTML_FILE_EXTENSION tag can be used to specify the file extension for each
1045# generated HTML page (for example: .htm, .php, .asp).
1046# The default value is: .html.
1047# This tag requires that the tag GENERATE_HTML is set to YES.
1048
1049HTML_FILE_EXTENSION = .html
1050
1051# The HTML_HEADER tag can be used to specify a user-defined HTML header file for
1052# each generated HTML page. If the tag is left blank doxygen will generate a
1053# standard header.
1054#
1055# To get valid HTML the header file that includes any scripts and style sheets
1056# that doxygen needs, which is dependent on the configuration options used (e.g.
1057# the setting GENERATE_TREEVIEW). It is highly recommended to start with a
1058# default header using
1059# doxygen -w html new_header.html new_footer.html new_stylesheet.css
1060# YourConfigFile
1061# and then modify the file new_header.html. See also section "Doxygen usage"
1062# for information on how to generate the default header that doxygen normally
1063# uses.
1064# Note: The header is subject to change so you typically have to regenerate the
1065# default header when upgrading to a newer version of doxygen. For a description
1066# of the possible markers and block names see the documentation.
1067# This tag requires that the tag GENERATE_HTML is set to YES.
1068
1069HTML_HEADER =
1070
1071# The HTML_FOOTER tag can be used to specify a user-defined HTML footer for each
1072# generated HTML page. If the tag is left blank doxygen will generate a standard
1073# footer. See HTML_HEADER for more information on how to generate a default
1074# footer and what special commands can be used inside the footer. See also
1075# section "Doxygen usage" for information on how to generate the default footer
1076# that doxygen normally uses.
1077# This tag requires that the tag GENERATE_HTML is set to YES.
1078
1079HTML_FOOTER =
1080
1081# The HTML_STYLESHEET tag can be used to specify a user-defined cascading style
1082# sheet that is used by each HTML page. It can be used to fine-tune the look of
1083# the HTML output. If left blank doxygen will generate a default style sheet.
1084# See also section "Doxygen usage" for information on how to generate the style
1085# sheet that doxygen normally uses.
1086# Note: It is recommended to use HTML_EXTRA_STYLESHEET instead of this tag, as
1087# it is more robust and this tag (HTML_STYLESHEET) will in the future become
1088# obsolete.
1089# This tag requires that the tag GENERATE_HTML is set to YES.
1090
1091HTML_STYLESHEET =
1092
1093# The HTML_EXTRA_STYLESHEET tag can be used to specify additional user-defined
1094# cascading style sheets that are included after the standard style sheets
1095# created by doxygen. Using this option one can overrule certain style aspects.
1096# This is preferred over using HTML_STYLESHEET since it does not replace the
1097# standard style sheet and is therefor more robust against future updates.
1098# Doxygen will copy the style sheet files to the output directory.
1099# Note: The order of the extra stylesheet files is of importance (e.g. the last
1100# stylesheet in the list overrules the setting of the previous ones in the
1101# list). For an example see the documentation.
1102# This tag requires that the tag GENERATE_HTML is set to YES.
1103
1104HTML_EXTRA_STYLESHEET =
1105
1106# The HTML_EXTRA_FILES tag can be used to specify one or more extra images or
1107# other source files which should be copied to the HTML output directory. Note
1108# that these files will be copied to the base HTML output directory. Use the
1109# $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these
1110# files. In the HTML_STYLESHEET file, use the file name only. Also note that the
1111# files will be copied as-is; there are no commands or markers available.
1112# This tag requires that the tag GENERATE_HTML is set to YES.
1113
1114HTML_EXTRA_FILES =
1115
1116# The HTML_COLORSTYLE_HUE tag controls the color of the HTML output. Doxygen
1117# will adjust the colors in the stylesheet and background images according to
1118# this color. Hue is specified as an angle on a colorwheel, see
1119# http://en.wikipedia.org/wiki/Hue for more information. For instance the value
1120# 0 represents red, 60 is yellow, 120 is green, 180 is cyan, 240 is blue, 300
1121# purple, and 360 is red again.
1122# Minimum value: 0, maximum value: 359, default value: 220.
1123# This tag requires that the tag GENERATE_HTML is set to YES.
1124
1125HTML_COLORSTYLE_HUE = 220
1126
1127# The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of the colors
1128# in the HTML output. For a value of 0 the output will use grayscales only. A
1129# value of 255 will produce the most vivid colors.
1130# Minimum value: 0, maximum value: 255, default value: 100.
1131# This tag requires that the tag GENERATE_HTML is set to YES.
1132
1133HTML_COLORSTYLE_SAT = 100
1134
1135# The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to the
1136# luminance component of the colors in the HTML output. Values below 100
1137# gradually make the output lighter, whereas values above 100 make the output
1138# darker. The value divided by 100 is the actual gamma applied, so 80 represents
1139# a gamma of 0.8, The value 220 represents a gamma of 2.2, and 100 does not
1140# change the gamma.
1141# Minimum value: 40, maximum value: 240, default value: 80.
1142# This tag requires that the tag GENERATE_HTML is set to YES.
1143
1144HTML_COLORSTYLE_GAMMA = 80
1145
1146# If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML
1147# page will contain the date and time when the page was generated. Setting this
1148# to NO can help when comparing the output of multiple runs.
1149# The default value is: YES.
1150# This tag requires that the tag GENERATE_HTML is set to YES.
1151
1152HTML_TIMESTAMP = YES
1153
1154# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML
1155# documentation will contain sections that can be hidden and shown after the
1156# page has loaded.
1157# The default value is: NO.
1158# This tag requires that the tag GENERATE_HTML is set to YES.
1159
1160HTML_DYNAMIC_SECTIONS = NO
1161
1162# With HTML_INDEX_NUM_ENTRIES one can control the preferred number of entries
1163# shown in the various tree structured indices initially; the user can expand
1164# and collapse entries dynamically later on. Doxygen will expand the tree to
1165# such a level that at most the specified number of entries are visible (unless
1166# a fully collapsed tree already exceeds this amount). So setting the number of
1167# entries 1 will produce a full collapsed tree by default. 0 is a special value
1168# representing an infinite number of entries and will result in a full expanded
1169# tree by default.
1170# Minimum value: 0, maximum value: 9999, default value: 100.
1171# This tag requires that the tag GENERATE_HTML is set to YES.
1172
1173HTML_INDEX_NUM_ENTRIES = 100
1174
1175# If the GENERATE_DOCSET tag is set to YES, additional index files will be
1176# generated that can be used as input for Apple's Xcode 3 integrated development
1177# environment (see: http://developer.apple.com/tools/xcode/), introduced with
1178# OSX 10.5 (Leopard). To create a documentation set, doxygen will generate a
1179# Makefile in the HTML output directory. Running make will produce the docset in
1180# that directory and running make install will install the docset in
1181# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find it at
1182# startup. See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html
1183# for more information.
1184# The default value is: NO.
1185# This tag requires that the tag GENERATE_HTML is set to YES.
1186
1187GENERATE_DOCSET = NO
1188
1189# This tag determines the name of the docset feed. A documentation feed provides
1190# an umbrella under which multiple documentation sets from a single provider
1191# (such as a company or product suite) can be grouped.
1192# The default value is: Doxygen generated docs.
1193# This tag requires that the tag GENERATE_DOCSET is set to YES.
1194
1195DOCSET_FEEDNAME = "Doxygen generated docs"
1196
1197# This tag specifies a string that should uniquely identify the documentation
1198# set bundle. This should be a reverse domain-name style string, e.g.
1199# com.mycompany.MyDocSet. Doxygen will append .docset to the name.
1200# The default value is: org.doxygen.Project.
1201# This tag requires that the tag GENERATE_DOCSET is set to YES.
1202
1203DOCSET_BUNDLE_ID = org.doxygen.Project
1204
1205# The DOCSET_PUBLISHER_ID tag specifies a string that should uniquely identify
1206# the documentation publisher. This should be a reverse domain-name style
1207# string, e.g. com.mycompany.MyDocSet.documentation.
1208# The default value is: org.doxygen.Publisher.
1209# This tag requires that the tag GENERATE_DOCSET is set to YES.
1210
1211DOCSET_PUBLISHER_ID = org.doxygen.Publisher
1212
1213# The DOCSET_PUBLISHER_NAME tag identifies the documentation publisher.
1214# The default value is: Publisher.
1215# This tag requires that the tag GENERATE_DOCSET is set to YES.
1216
1217DOCSET_PUBLISHER_NAME = Publisher
1218
1219# If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
1220# additional HTML index files: index.hhp, index.hhc, and index.hhk. The
1221# index.hhp is a project file that can be read by Microsoft's HTML Help Workshop
1222# (see: http://www.microsoft.com/en-us/download/details.aspx?id=21138) on
1223# Windows.
1224#
1225# The HTML Help Workshop contains a compiler that can convert all HTML output
1226# generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
1227# files are now used as the Windows 98 help format, and will replace the old
1228# Windows help format (.hlp) on all Windows platforms in the future. Compressed
1229# HTML files also contain an index, a table of contents, and you can search for
1230# words in the documentation. The HTML workshop also contains a viewer for
1231# compressed HTML files.
1232# The default value is: NO.
1233# This tag requires that the tag GENERATE_HTML is set to YES.
1234
1235GENERATE_HTMLHELP = NO
1236
1237# The CHM_FILE tag can be used to specify the file name of the resulting .chm
1238# file. You can add a path in front of the file if the result should not be
1239# written to the html output directory.
1240# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1241
1242CHM_FILE =
1243
1244# The HHC_LOCATION tag can be used to specify the location (absolute path
1245# including file name) of the HTML help compiler ( hhc.exe). If non-empty
1246# doxygen will try to run the HTML help compiler on the generated index.hhp.
1247# The file has to be specified with full path.
1248# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1249
1250HHC_LOCATION =
1251
1252# The GENERATE_CHI flag controls if a separate .chi index file is generated (
1253# YES) or that it should be included in the master .chm file ( NO).
1254# The default value is: NO.
1255# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1256
1257GENERATE_CHI = NO
1258
1259# The CHM_INDEX_ENCODING is used to encode HtmlHelp index ( hhk), content ( hhc)
1260# and project file content.
1261# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1262
1263CHM_INDEX_ENCODING =
1264
1265# The BINARY_TOC flag controls whether a binary table of contents is generated (
1266# YES) or a normal table of contents ( NO) in the .chm file. Furthermore it
1267# enables the Previous and Next buttons.
1268# The default value is: NO.
1269# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1270
1271BINARY_TOC = NO
1272
1273# The TOC_EXPAND flag can be set to YES to add extra items for group members to
1274# the table of contents of the HTML help documentation and to the tree view.
1275# The default value is: NO.
1276# This tag requires that the tag GENERATE_HTMLHELP is set to YES.
1277
1278TOC_EXPAND = NO
1279
1280# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and
1281# QHP_VIRTUAL_FOLDER are set, an additional index file will be generated that
1282# can be used as input for Qt's qhelpgenerator to generate a Qt Compressed Help
1283# (.qch) of the generated HTML documentation.
1284# The default value is: NO.
1285# This tag requires that the tag GENERATE_HTML is set to YES.
1286
1287GENERATE_QHP = NO
1288
1289# If the QHG_LOCATION tag is specified, the QCH_FILE tag can be used to specify
1290# the file name of the resulting .qch file. The path specified is relative to
1291# the HTML output folder.
1292# This tag requires that the tag GENERATE_QHP is set to YES.
1293
1294QCH_FILE =
1295
1296# The QHP_NAMESPACE tag specifies the namespace to use when generating Qt Help
1297# Project output. For more information please see Qt Help Project / Namespace
1298# (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#namespace).
1299# The default value is: org.doxygen.Project.
1300# This tag requires that the tag GENERATE_QHP is set to YES.
1301
1302QHP_NAMESPACE = org.doxygen.Project
1303
1304# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating Qt
1305# Help Project output. For more information please see Qt Help Project / Virtual
1306# Folders (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#virtual-
1307# folders).
1308# The default value is: doc.
1309# This tag requires that the tag GENERATE_QHP is set to YES.
1310
1311QHP_VIRTUAL_FOLDER = doc
1312
1313# If the QHP_CUST_FILTER_NAME tag is set, it specifies the name of a custom
1314# filter to add. For more information please see Qt Help Project / Custom
1315# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
1316# filters).
1317# This tag requires that the tag GENERATE_QHP is set to YES.
1318
1319QHP_CUST_FILTER_NAME =
1320
1321# The QHP_CUST_FILTER_ATTRS tag specifies the list of the attributes of the
1322# custom filter to add. For more information please see Qt Help Project / Custom
1323# Filters (see: http://qt-project.org/doc/qt-4.8/qthelpproject.html#custom-
1324# filters).
1325# This tag requires that the tag GENERATE_QHP is set to YES.
1326
1327QHP_CUST_FILTER_ATTRS =
1328
1329# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this
1330# project's filter section matches. Qt Help Project / Filter Attributes (see:
1331# http://qt-project.org/doc/qt-4.8/qthelpproject.html#filter-attributes).
1332# This tag requires that the tag GENERATE_QHP is set to YES.
1333
1334QHP_SECT_FILTER_ATTRS =
1335
1336# The QHG_LOCATION tag can be used to specify the location of Qt's
1337# qhelpgenerator. If non-empty doxygen will try to run qhelpgenerator on the
1338# generated .qhp file.
1339# This tag requires that the tag GENERATE_QHP is set to YES.
1340
1341QHG_LOCATION =
1342
1343# If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files will be
1344# generated, together with the HTML files, they form an Eclipse help plugin. To
1345# install this plugin and make it available under the help contents menu in
1346# Eclipse, the contents of the directory containing the HTML and XML files needs
1347# to be copied into the plugins directory of eclipse. The name of the directory
1348# within the plugins directory should be the same as the ECLIPSE_DOC_ID value.
1349# After copying Eclipse needs to be restarted before the help appears.
1350# The default value is: NO.
1351# This tag requires that the tag GENERATE_HTML is set to YES.
1352
1353GENERATE_ECLIPSEHELP = NO
1354
1355# A unique identifier for the Eclipse help plugin. When installing the plugin
1356# the directory name containing the HTML and XML files should also have this
1357# name. Each documentation set should have its own identifier.
1358# The default value is: org.doxygen.Project.
1359# This tag requires that the tag GENERATE_ECLIPSEHELP is set to YES.
1360
1361ECLIPSE_DOC_ID = org.doxygen.Project
1362
1363# If you want full control over the layout of the generated HTML pages it might
1364# be necessary to disable the index and replace it with your own. The
1365# DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs) at top
1366# of each HTML page. A value of NO enables the index and the value YES disables
1367# it. Since the tabs in the index contain the same information as the navigation
1368# tree, you can set this option to YES if you also set GENERATE_TREEVIEW to YES.
1369# The default value is: NO.
1370# This tag requires that the tag GENERATE_HTML is set to YES.
1371
1372DISABLE_INDEX = NO
1373
1374# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index
1375# structure should be generated to display hierarchical information. If the tag
1376# value is set to YES, a side panel will be generated containing a tree-like
1377# index structure (just like the one that is generated for HTML Help). For this
1378# to work a browser that supports JavaScript, DHTML, CSS and frames is required
1379# (i.e. any modern browser). Windows users are probably better off using the
1380# HTML help feature. Via custom stylesheets (see HTML_EXTRA_STYLESHEET) one can
1381# further fine-tune the look of the index. As an example, the default style
1382# sheet generated by doxygen has an example that shows how to put an image at
1383# the root of the tree instead of the PROJECT_NAME. Since the tree basically has
1384# the same information as the tab index, you could consider setting
1385# DISABLE_INDEX to YES when enabling this option.
1386# The default value is: NO.
1387# This tag requires that the tag GENERATE_HTML is set to YES.
1388
1389GENERATE_TREEVIEW = NO
1390
1391# The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values that
1392# doxygen will group on one line in the generated HTML documentation.
1393#
1394# Note that a value of 0 will completely suppress the enum values from appearing
1395# in the overview section.
1396# Minimum value: 0, maximum value: 20, default value: 4.
1397# This tag requires that the tag GENERATE_HTML is set to YES.
1398
1399ENUM_VALUES_PER_LINE = 4
1400
1401# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be used
1402# to set the initial width (in pixels) of the frame in which the tree is shown.
1403# Minimum value: 0, maximum value: 1500, default value: 250.
1404# This tag requires that the tag GENERATE_HTML is set to YES.
1405
1406TREEVIEW_WIDTH = 250
1407
1408# When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open links to
1409# external symbols imported via tag files in a separate window.
1410# The default value is: NO.
1411# This tag requires that the tag GENERATE_HTML is set to YES.
1412
1413EXT_LINKS_IN_WINDOW = NO
1414
1415# Use this tag to change the font size of LaTeX formulas included as images in
1416# the HTML documentation. When you change the font size after a successful
1417# doxygen run you need to manually remove any form_*.png images from the HTML
1418# output directory to force them to be regenerated.
1419# Minimum value: 8, maximum value: 50, default value: 10.
1420# This tag requires that the tag GENERATE_HTML is set to YES.
1421
1422FORMULA_FONTSIZE = 10
1423
1424# Use the FORMULA_TRANPARENT tag to determine whether or not the images
1425# generated for formulas are transparent PNGs. Transparent PNGs are not
1426# supported properly for IE 6.0, but are supported on all modern browsers.
1427#
1428# Note that when changing this option you need to delete any form_*.png files in
1429# the HTML output directory before the changes have effect.
1430# The default value is: YES.
1431# This tag requires that the tag GENERATE_HTML is set to YES.
1432
1433FORMULA_TRANSPARENT = YES
1434
1435# Enable the USE_MATHJAX option to render LaTeX formulas using MathJax (see
1436# http://www.mathjax.org) which uses client side Javascript for the rendering
1437# instead of using prerendered bitmaps. Use this if you do not have LaTeX
1438# installed or if you want to formulas look prettier in the HTML output. When
1439# enabled you may also need to install MathJax separately and configure the path
1440# to it using the MATHJAX_RELPATH option.
1441# The default value is: NO.
1442# This tag requires that the tag GENERATE_HTML is set to YES.
1443
1444USE_MATHJAX = NO
1445
1446# When MathJax is enabled you can set the default output format to be used for
1447# the MathJax output. See the MathJax site (see:
1448# http://docs.mathjax.org/en/latest/output.html) for more details.
1449# Possible values are: HTML-CSS (which is slower, but has the best
1450# compatibility), NativeMML (i.e. MathML) and SVG.
1451# The default value is: HTML-CSS.
1452# This tag requires that the tag USE_MATHJAX is set to YES.
1453
1454MATHJAX_FORMAT = HTML-CSS
1455
1456# When MathJax is enabled you need to specify the location relative to the HTML
1457# output directory using the MATHJAX_RELPATH option. The destination directory
1458# should contain the MathJax.js script. For instance, if the mathjax directory
1459# is located at the same level as the HTML output directory, then
1460# MATHJAX_RELPATH should be ../mathjax. The default value points to the MathJax
1461# Content Delivery Network so you can quickly see the result without installing
1462# MathJax. However, it is strongly recommended to install a local copy of
1463# MathJax from http://www.mathjax.org before deployment.
1464# The default value is: http://cdn.mathjax.org/mathjax/latest.
1465# This tag requires that the tag USE_MATHJAX is set to YES.
1466
1467MATHJAX_RELPATH = http://cdn.mathjax.org/mathjax/latest
1468
1469# The MATHJAX_EXTENSIONS tag can be used to specify one or more MathJax
1470# extension names that should be enabled during MathJax rendering. For example
1471# MATHJAX_EXTENSIONS = TeX/AMSmath TeX/AMSsymbols
1472# This tag requires that the tag USE_MATHJAX is set to YES.
1473
1474MATHJAX_EXTENSIONS =
1475
1476# The MATHJAX_CODEFILE tag can be used to specify a file with javascript pieces
1477# of code that will be used on startup of the MathJax code. See the MathJax site
1478# (see: http://docs.mathjax.org/en/latest/output.html) for more details. For an
1479# example see the documentation.
1480# This tag requires that the tag USE_MATHJAX is set to YES.
1481
1482MATHJAX_CODEFILE =
1483
1484# When the SEARCHENGINE tag is enabled doxygen will generate a search box for
1485# the HTML output. The underlying search engine uses javascript and DHTML and
1486# should work on any modern browser. Note that when using HTML help
1487# (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets (GENERATE_DOCSET)
1488# there is already a search function so this one should typically be disabled.
1489# For large projects the javascript based search engine can be slow, then
1490# enabling SERVER_BASED_SEARCH may provide a better solution. It is possible to
1491# search using the keyboard; to jump to the search box use <access key> + S
1492# (what the <access key> is depends on the OS and browser, but it is typically
1493# <CTRL>, <ALT>/<option>, or both). Inside the search box use the <cursor down
1494# key> to jump into the search results window, the results can be navigated
1495# using the <cursor keys>. Press <Enter> to select an item or <escape> to cancel
1496# the search. The filter options can be selected when the cursor is inside the
1497# search box by pressing <Shift>+<cursor down>. Also here use the <cursor keys>
1498# to select a filter and <Enter> or <escape> to activate or cancel the filter
1499# option.
1500# The default value is: YES.
1501# This tag requires that the tag GENERATE_HTML is set to YES.
1502
1503SEARCHENGINE = YES
1504
1505# When the SERVER_BASED_SEARCH tag is enabled the search engine will be
1506# implemented using a web server instead of a web client using Javascript. There
1507# are two flavors of web server based searching depending on the EXTERNAL_SEARCH
1508# setting. When disabled, doxygen will generate a PHP script for searching and
1509# an index file used by the script. When EXTERNAL_SEARCH is enabled the indexing
1510# and searching needs to be provided by external tools. See the section
1511# "External Indexing and Searching" for details.
1512# The default value is: NO.
1513# This tag requires that the tag SEARCHENGINE is set to YES.
1514
1515SERVER_BASED_SEARCH = NO
1516
1517# When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
1518# script for searching. Instead the search results are written to an XML file
1519# which needs to be processed by an external indexer. Doxygen will invoke an
1520# external search engine pointed to by the SEARCHENGINE_URL option to obtain the
1521# search results.
1522#
1523# Doxygen ships with an example indexer ( doxyindexer) and search engine
1524# (doxysearch.cgi) which are based on the open source search engine library
1525# Xapian (see: http://xapian.org/).
1526#
1527# See the section "External Indexing and Searching" for details.
1528# The default value is: NO.
1529# This tag requires that the tag SEARCHENGINE is set to YES.
1530
1531EXTERNAL_SEARCH = NO
1532
1533# The SEARCHENGINE_URL should point to a search engine hosted by a web server
1534# which will return the search results when EXTERNAL_SEARCH is enabled.
1535#
1536# Doxygen ships with an example indexer ( doxyindexer) and search engine
1537# (doxysearch.cgi) which are based on the open source search engine library
1538# Xapian (see: http://xapian.org/). See the section "External Indexing and
1539# Searching" for details.
1540# This tag requires that the tag SEARCHENGINE is set to YES.
1541
1542SEARCHENGINE_URL =
1543
1544# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed
1545# search data is written to a file for indexing by an external tool. With the
1546# SEARCHDATA_FILE tag the name of this file can be specified.
1547# The default file is: searchdata.xml.
1548# This tag requires that the tag SEARCHENGINE is set to YES.
1549
1550SEARCHDATA_FILE = searchdata.xml
1551
1552# When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the
1553# EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is
1554# useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple
1555# projects and redirect the results back to the right project.
1556# This tag requires that the tag SEARCHENGINE is set to YES.
1557
1558EXTERNAL_SEARCH_ID =
1559
1560# The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
1561# projects other than the one defined by this configuration file, but that are
1562# all added to the same external search index. Each project needs to have a
1563# unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id of
1564# to a relative location where the documentation can be found. The format is:
1565# EXTRA_SEARCH_MAPPINGS = tagname1=loc1 tagname2=loc2 ...
1566# This tag requires that the tag SEARCHENGINE is set to YES.
1567
1568EXTRA_SEARCH_MAPPINGS =
1569
1570#---------------------------------------------------------------------------
1571# Configuration options related to the LaTeX output
1572#---------------------------------------------------------------------------
1573
1574# If the GENERATE_LATEX tag is set to YES doxygen will generate LaTeX output.
1575# The default value is: YES.
1576
1577GENERATE_LATEX = NO
1578
1579# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. If a
1580# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1581# it.
1582# The default directory is: latex.
1583# This tag requires that the tag GENERATE_LATEX is set to YES.
1584
1585LATEX_OUTPUT = latex
1586
1587# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be
1588# invoked.
1589#
1590# Note that when enabling USE_PDFLATEX this option is only used for generating
1591# bitmaps for formulas in the HTML output, but not in the Makefile that is
1592# written to the output directory.
1593# The default file is: latex.
1594# This tag requires that the tag GENERATE_LATEX is set to YES.
1595
1596LATEX_CMD_NAME = latex
1597
1598# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to generate
1599# index for LaTeX.
1600# The default file is: makeindex.
1601# This tag requires that the tag GENERATE_LATEX is set to YES.
1602
1603MAKEINDEX_CMD_NAME = makeindex
1604
1605# If the COMPACT_LATEX tag is set to YES doxygen generates more compact LaTeX
1606# documents. This may be useful for small projects and may help to save some
1607# trees in general.
1608# The default value is: NO.
1609# This tag requires that the tag GENERATE_LATEX is set to YES.
1610
1611COMPACT_LATEX = NO
1612
1613# The PAPER_TYPE tag can be used to set the paper type that is used by the
1614# printer.
1615# Possible values are: a4 (210 x 297 mm), letter (8.5 x 11 inches), legal (8.5 x
1616# 14 inches) and executive (7.25 x 10.5 inches).
1617# The default value is: a4.
1618# This tag requires that the tag GENERATE_LATEX is set to YES.
1619
1620PAPER_TYPE = a4
1621
1622# The EXTRA_PACKAGES tag can be used to specify one or more LaTeX package names
1623# that should be included in the LaTeX output. To get the times font for
1624# instance you can specify
1625# EXTRA_PACKAGES=times
1626# If left blank no extra packages will be included.
1627# This tag requires that the tag GENERATE_LATEX is set to YES.
1628
1629EXTRA_PACKAGES =
1630
1631# The LATEX_HEADER tag can be used to specify a personal LaTeX header for the
1632# generated LaTeX document. The header should contain everything until the first
1633# chapter. If it is left blank doxygen will generate a standard header. See
1634# section "Doxygen usage" for information on how to let doxygen write the
1635# default header to a separate file.
1636#
1637# Note: Only use a user-defined header if you know what you are doing! The
1638# following commands have a special meaning inside the header: $title,
1639# $datetime, $date, $doxygenversion, $projectname, $projectnumber,
1640# $projectbrief, $projectlogo. Doxygen will replace $title with the empy string,
1641# for the replacement values of the other commands the user is refered to
1642# HTML_HEADER.
1643# This tag requires that the tag GENERATE_LATEX is set to YES.
1644
1645LATEX_HEADER =
1646
1647# The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for the
1648# generated LaTeX document. The footer should contain everything after the last
1649# chapter. If it is left blank doxygen will generate a standard footer. See
1650# LATEX_HEADER for more information on how to generate a default footer and what
1651# special commands can be used inside the footer.
1652#
1653# Note: Only use a user-defined footer if you know what you are doing!
1654# This tag requires that the tag GENERATE_LATEX is set to YES.
1655
1656LATEX_FOOTER =
1657
1658# The LATEX_EXTRA_FILES tag can be used to specify one or more extra images or
1659# other source files which should be copied to the LATEX_OUTPUT output
1660# directory. Note that the files will be copied as-is; there are no commands or
1661# markers available.
1662# This tag requires that the tag GENERATE_LATEX is set to YES.
1663
1664LATEX_EXTRA_FILES =
1665
1666# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated is
1667# prepared for conversion to PDF (using ps2pdf or pdflatex). The PDF file will
1668# contain links (just like the HTML output) instead of page references. This
1669# makes the output suitable for online browsing using a PDF viewer.
1670# The default value is: YES.
1671# This tag requires that the tag GENERATE_LATEX is set to YES.
1672
1673PDF_HYPERLINKS = YES
1674
1675# If the USE_PDFLATEX tag is set to YES, doxygen will use pdflatex to generate
1676# the PDF file directly from the LaTeX files. Set this option to YES to get a
1677# higher quality PDF documentation.
1678# The default value is: YES.
1679# This tag requires that the tag GENERATE_LATEX is set to YES.
1680
1681USE_PDFLATEX = YES
1682
1683# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \batchmode
1684# command to the generated LaTeX files. This will instruct LaTeX to keep running
1685# if errors occur, instead of asking the user for help. This option is also used
1686# when generating formulas in HTML.
1687# The default value is: NO.
1688# This tag requires that the tag GENERATE_LATEX is set to YES.
1689
1690LATEX_BATCHMODE = NO
1691
1692# If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
1693# index chapters (such as File Index, Compound Index, etc.) in the output.
1694# The default value is: NO.
1695# This tag requires that the tag GENERATE_LATEX is set to YES.
1696
1697LATEX_HIDE_INDICES = NO
1698
1699# If the LATEX_SOURCE_CODE tag is set to YES then doxygen will include source
1700# code with syntax highlighting in the LaTeX output.
1701#
1702# Note that which sources are shown also depends on other settings such as
1703# SOURCE_BROWSER.
1704# The default value is: NO.
1705# This tag requires that the tag GENERATE_LATEX is set to YES.
1706
1707LATEX_SOURCE_CODE = NO
1708
1709# The LATEX_BIB_STYLE tag can be used to specify the style to use for the
1710# bibliography, e.g. plainnat, or ieeetr. See
1711# http://en.wikipedia.org/wiki/BibTeX and \cite for more info.
1712# The default value is: plain.
1713# This tag requires that the tag GENERATE_LATEX is set to YES.
1714
1715LATEX_BIB_STYLE = plain
1716
1717#---------------------------------------------------------------------------
1718# Configuration options related to the RTF output
1719#---------------------------------------------------------------------------
1720
1721# If the GENERATE_RTF tag is set to YES doxygen will generate RTF output. The
1722# RTF output is optimized for Word 97 and may not look too pretty with other RTF
1723# readers/editors.
1724# The default value is: NO.
1725
1726GENERATE_RTF = NO
1727
1728# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. If a
1729# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1730# it.
1731# The default directory is: rtf.
1732# This tag requires that the tag GENERATE_RTF is set to YES.
1733
1734RTF_OUTPUT = rtf
1735
1736# If the COMPACT_RTF tag is set to YES doxygen generates more compact RTF
1737# documents. This may be useful for small projects and may help to save some
1738# trees in general.
1739# The default value is: NO.
1740# This tag requires that the tag GENERATE_RTF is set to YES.
1741
1742COMPACT_RTF = NO
1743
1744# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated will
1745# contain hyperlink fields. The RTF file will contain links (just like the HTML
1746# output) instead of page references. This makes the output suitable for online
1747# browsing using Word or some other Word compatible readers that support those
1748# fields.
1749#
1750# Note: WordPad (write) and others do not support links.
1751# The default value is: NO.
1752# This tag requires that the tag GENERATE_RTF is set to YES.
1753
1754RTF_HYPERLINKS = NO
1755
1756# Load stylesheet definitions from file. Syntax is similar to doxygen's config
1757# file, i.e. a series of assignments. You only have to provide replacements,
1758# missing definitions are set to their default value.
1759#
1760# See also section "Doxygen usage" for information on how to generate the
1761# default style sheet that doxygen normally uses.
1762# This tag requires that the tag GENERATE_RTF is set to YES.
1763
1764RTF_STYLESHEET_FILE =
1765
1766# Set optional variables used in the generation of an RTF document. Syntax is
1767# similar to doxygen's config file. A template extensions file can be generated
1768# using doxygen -e rtf extensionFile.
1769# This tag requires that the tag GENERATE_RTF is set to YES.
1770
1771RTF_EXTENSIONS_FILE =
1772
1773#---------------------------------------------------------------------------
1774# Configuration options related to the man page output
1775#---------------------------------------------------------------------------
1776
1777# If the GENERATE_MAN tag is set to YES doxygen will generate man pages for
1778# classes and files.
1779# The default value is: NO.
1780
1781GENERATE_MAN = NO
1782
1783# The MAN_OUTPUT tag is used to specify where the man pages will be put. If a
1784# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1785# it. A directory man3 will be created inside the directory specified by
1786# MAN_OUTPUT.
1787# The default directory is: man.
1788# This tag requires that the tag GENERATE_MAN is set to YES.
1789
1790MAN_OUTPUT = man
1791
1792# The MAN_EXTENSION tag determines the extension that is added to the generated
1793# man pages. In case the manual section does not start with a number, the number
1794# 3 is prepended. The dot (.) at the beginning of the MAN_EXTENSION tag is
1795# optional.
1796# The default value is: .3.
1797# This tag requires that the tag GENERATE_MAN is set to YES.
1798
1799MAN_EXTENSION = .3
1800
1801# The MAN_SUBDIR tag determines the name of the directory created within
1802# MAN_OUTPUT in which the man pages are placed. If defaults to man followed by
1803# MAN_EXTENSION with the initial . removed.
1804# This tag requires that the tag GENERATE_MAN is set to YES.
1805
1806MAN_SUBDIR =
1807
1808# If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
1809# will generate one additional man file for each entity documented in the real
1810# man page(s). These additional files only source the real man page, but without
1811# them the man command would be unable to find the correct page.
1812# The default value is: NO.
1813# This tag requires that the tag GENERATE_MAN is set to YES.
1814
1815MAN_LINKS = NO
1816
1817#---------------------------------------------------------------------------
1818# Configuration options related to the XML output
1819#---------------------------------------------------------------------------
1820
1821# If the GENERATE_XML tag is set to YES doxygen will generate an XML file that
1822# captures the structure of the code including all documentation.
1823# The default value is: NO.
1824
1825GENERATE_XML = NO
1826
1827# The XML_OUTPUT tag is used to specify where the XML pages will be put. If a
1828# relative path is entered the value of OUTPUT_DIRECTORY will be put in front of
1829# it.
1830# The default directory is: xml.
1831# This tag requires that the tag GENERATE_XML is set to YES.
1832
1833XML_OUTPUT = xml
1834
1835# If the XML_PROGRAMLISTING tag is set to YES doxygen will dump the program
1836# listings (including syntax highlighting and cross-referencing information) to
1837# the XML output. Note that enabling this will significantly increase the size
1838# of the XML output.
1839# The default value is: YES.
1840# This tag requires that the tag GENERATE_XML is set to YES.
1841
1842XML_PROGRAMLISTING = YES
1843
1844#---------------------------------------------------------------------------
1845# Configuration options related to the DOCBOOK output
1846#---------------------------------------------------------------------------
1847
1848# If the GENERATE_DOCBOOK tag is set to YES doxygen will generate Docbook files
1849# that can be used to generate PDF.
1850# The default value is: NO.
1851
1852GENERATE_DOCBOOK = NO
1853
1854# The DOCBOOK_OUTPUT tag is used to specify where the Docbook pages will be put.
1855# If a relative path is entered the value of OUTPUT_DIRECTORY will be put in
1856# front of it.
1857# The default directory is: docbook.
1858# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
1859
1860DOCBOOK_OUTPUT = docbook
1861
1862# If the DOCBOOK_PROGRAMLISTING tag is set to YES doxygen will include the
1863# program listings (including syntax highlighting and cross-referencing
1864# information) to the DOCBOOK output. Note that enabling this will significantly
1865# increase the size of the DOCBOOK output.
1866# The default value is: NO.
1867# This tag requires that the tag GENERATE_DOCBOOK is set to YES.
1868
1869DOCBOOK_PROGRAMLISTING = NO
1870
1871#---------------------------------------------------------------------------
1872# Configuration options for the AutoGen Definitions output
1873#---------------------------------------------------------------------------
1874
1875# If the GENERATE_AUTOGEN_DEF tag is set to YES doxygen will generate an AutoGen
1876# Definitions (see http://autogen.sf.net) file that captures the structure of
1877# the code including all documentation. Note that this feature is still
1878# experimental and incomplete at the moment.
1879# The default value is: NO.
1880
1881GENERATE_AUTOGEN_DEF = NO
1882
1883#---------------------------------------------------------------------------
1884# Configuration options related to the Perl module output
1885#---------------------------------------------------------------------------
1886
1887# If the GENERATE_PERLMOD tag is set to YES doxygen will generate a Perl module
1888# file that captures the structure of the code including all documentation.
1889#
1890# Note that this feature is still experimental and incomplete at the moment.
1891# The default value is: NO.
1892
1893GENERATE_PERLMOD = NO
1894
1895# If the PERLMOD_LATEX tag is set to YES doxygen will generate the necessary
1896# Makefile rules, Perl scripts and LaTeX code to be able to generate PDF and DVI
1897# output from the Perl module output.
1898# The default value is: NO.
1899# This tag requires that the tag GENERATE_PERLMOD is set to YES.
1900
1901PERLMOD_LATEX = NO
1902
1903# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be nicely
1904# formatted so it can be parsed by a human reader. This is useful if you want to
1905# understand what is going on. On the other hand, if this tag is set to NO the
1906# size of the Perl module output will be much smaller and Perl will parse it
1907# just the same.
1908# The default value is: YES.
1909# This tag requires that the tag GENERATE_PERLMOD is set to YES.
1910
1911PERLMOD_PRETTY = YES
1912
1913# The names of the make variables in the generated doxyrules.make file are
1914# prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. This is useful
1915# so different doxyrules.make files included by the same Makefile don't
1916# overwrite each other's variables.
1917# This tag requires that the tag GENERATE_PERLMOD is set to YES.
1918
1919PERLMOD_MAKEVAR_PREFIX =
1920
1921#---------------------------------------------------------------------------
1922# Configuration options related to the preprocessor
1923#---------------------------------------------------------------------------
1924
1925# If the ENABLE_PREPROCESSING tag is set to YES doxygen will evaluate all
1926# C-preprocessor directives found in the sources and include files.
1927# The default value is: YES.
1928
1929ENABLE_PREPROCESSING = NO
1930
1931# If the MACRO_EXPANSION tag is set to YES doxygen will expand all macro names
1932# in the source code. If set to NO only conditional compilation will be
1933# performed. Macro expansion can be done in a controlled way by setting
1934# EXPAND_ONLY_PREDEF to YES.
1935# The default value is: NO.
1936# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
1937
1938MACRO_EXPANSION = NO
1939
1940# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES then
1941# the macro expansion is limited to the macros specified with the PREDEFINED and
1942# EXPAND_AS_DEFINED tags.
1943# The default value is: NO.
1944# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
1945
1946EXPAND_ONLY_PREDEF = NO
1947
1948# If the SEARCH_INCLUDES tag is set to YES the includes files in the
1949# INCLUDE_PATH will be searched if a #include is found.
1950# The default value is: YES.
1951# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
1952
1953SEARCH_INCLUDES = YES
1954
1955# The INCLUDE_PATH tag can be used to specify one or more directories that
1956# contain include files that are not input files but should be processed by the
1957# preprocessor.
1958# This tag requires that the tag SEARCH_INCLUDES is set to YES.
1959
1960INCLUDE_PATH =
1961
1962# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard
1963# patterns (like *.h and *.hpp) to filter out the header-files in the
1964# directories. If left blank, the patterns specified with FILE_PATTERNS will be
1965# used.
1966# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
1967
1968INCLUDE_FILE_PATTERNS =
1969
1970# The PREDEFINED tag can be used to specify one or more macro names that are
1971# defined before the preprocessor is started (similar to the -D option of e.g.
1972# gcc). The argument of the tag is a list of macros of the form: name or
1973# name=definition (no spaces). If the definition and the "=" are omitted, "=1"
1974# is assumed. To prevent a macro definition from being undefined via #undef or
1975# recursively expanded use the := operator instead of the = operator.
1976# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
1977
1978PREDEFINED =
1979
1980# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then this
1981# tag can be used to specify a list of macro names that should be expanded. The
1982# macro definition that is found in the sources will be used. Use the PREDEFINED
1983# tag if you want to use a different macro definition that overrules the
1984# definition found in the source code.
1985# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
1986
1987EXPAND_AS_DEFINED =
1988
1989# If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
1990# remove all references to function-like macros that are alone on a line, have
1991# an all uppercase name, and do not end with a semicolon. Such function macros
1992# are typically used for boiler-plate code, and will confuse the parser if not
1993# removed.
1994# The default value is: YES.
1995# This tag requires that the tag ENABLE_PREPROCESSING is set to YES.
1996
1997SKIP_FUNCTION_MACROS = YES
1998
1999#---------------------------------------------------------------------------
2000# Configuration options related to external references
2001#---------------------------------------------------------------------------
2002
2003# The TAGFILES tag can be used to specify one or more tag files. For each tag
2004# file the location of the external documentation should be added. The format of
2005# a tag file without this location is as follows:
2006# TAGFILES = file1 file2 ...
2007# Adding location for the tag files is done as follows:
2008# TAGFILES = file1=loc1 "file2 = loc2" ...
2009# where loc1 and loc2 can be relative or absolute paths or URLs. See the
2010# section "Linking to external documentation" for more information about the use
2011# of tag files.
2012# Note: Each tag file must have a unique name (where the name does NOT include
2013# the path). If a tag file is not located in the directory in which doxygen is
2014# run, you must also specify the path to the tagfile here.
2015
2016TAGFILES =
2017
2018# When a file name is specified after GENERATE_TAGFILE, doxygen will create a
2019# tag file that is based on the input files it reads. See section "Linking to
2020# external documentation" for more information about the usage of tag files.
2021
2022GENERATE_TAGFILE =
2023
2024# If the ALLEXTERNALS tag is set to YES all external class will be listed in the
2025# class index. If set to NO only the inherited external classes will be listed.
2026# The default value is: NO.
2027
2028ALLEXTERNALS = NO
2029
2030# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed in
2031# the modules index. If set to NO, only the current project's groups will be
2032# listed.
2033# The default value is: YES.
2034
2035EXTERNAL_GROUPS = YES
2036
2037# If the EXTERNAL_PAGES tag is set to YES all external pages will be listed in
2038# the related pages index. If set to NO, only the current project's pages will
2039# be listed.
2040# The default value is: YES.
2041
2042EXTERNAL_PAGES = YES
2043
2044# The PERL_PATH should be the absolute path and name of the perl script
2045# interpreter (i.e. the result of 'which perl').
2046# The default file (with absolute path) is: /usr/bin/perl.
2047
2048PERL_PATH = /usr/bin/perl
2049
2050#---------------------------------------------------------------------------
2051# Configuration options related to the dot tool
2052#---------------------------------------------------------------------------
2053
2054# If the CLASS_DIAGRAMS tag is set to YES doxygen will generate a class diagram
2055# (in HTML and LaTeX) for classes with base or super classes. Setting the tag to
2056# NO turns the diagrams off. Note that this option also works with HAVE_DOT
2057# disabled, but it is recommended to install and use dot, since it yields more
2058# powerful graphs.
2059# The default value is: YES.
2060
2061CLASS_DIAGRAMS = YES
2062
2063# You can define message sequence charts within doxygen comments using the \msc
2064# command. Doxygen will then run the mscgen tool (see:
2065# http://www.mcternan.me.uk/mscgen/)) to produce the chart and insert it in the
2066# documentation. The MSCGEN_PATH tag allows you to specify the directory where
2067# the mscgen tool resides. If left empty the tool is assumed to be found in the
2068# default search path.
2069
2070MSCGEN_PATH =
2071
2072# You can include diagrams made with dia in doxygen documentation. Doxygen will
2073# then run dia to produce the diagram and insert it in the documentation. The
2074# DIA_PATH tag allows you to specify the directory where the dia binary resides.
2075# If left empty dia is assumed to be found in the default search path.
2076
2077DIA_PATH =
2078
2079# If set to YES, the inheritance and collaboration graphs will hide inheritance
2080# and usage relations if the target is undocumented or is not a class.
2081# The default value is: YES.
2082
2083HIDE_UNDOC_RELATIONS = YES
2084
2085# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
2086# available from the path. This tool is part of Graphviz (see:
2087# http://www.graphviz.org/), a graph visualization toolkit from AT&T and Lucent
2088# Bell Labs. The other options in this section have no effect if this option is
2089# set to NO
2090# The default value is: YES.
2091
2092HAVE_DOT = NO
2093
2094# The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
2095# to run in parallel. When set to 0 doxygen will base this on the number of
2096# processors available in the system. You can set it explicitly to a value
2097# larger than 0 to get control over the balance between CPU load and processing
2098# speed.
2099# Minimum value: 0, maximum value: 32, default value: 0.
2100# This tag requires that the tag HAVE_DOT is set to YES.
2101
2102DOT_NUM_THREADS = 0
2103
2104# When you want a differently looking font in the dot files that doxygen
2105# generates you can specify the font name using DOT_FONTNAME. You need to make
2106# sure dot is able to find the font, which can be done by putting it in a
2107# standard location or by setting the DOTFONTPATH environment variable or by
2108# setting DOT_FONTPATH to the directory containing the font.
2109# The default value is: Helvetica.
2110# This tag requires that the tag HAVE_DOT is set to YES.
2111
2112DOT_FONTNAME = Helvetica
2113
2114# The DOT_FONTSIZE tag can be used to set the size (in points) of the font of
2115# dot graphs.
2116# Minimum value: 4, maximum value: 24, default value: 10.
2117# This tag requires that the tag HAVE_DOT is set to YES.
2118
2119DOT_FONTSIZE = 10
2120
2121# By default doxygen will tell dot to use the default font as specified with
2122# DOT_FONTNAME. If you specify a different font using DOT_FONTNAME you can set
2123# the path where dot can find it using this tag.
2124# This tag requires that the tag HAVE_DOT is set to YES.
2125
2126DOT_FONTPATH =
2127
2128# If the CLASS_GRAPH tag is set to YES then doxygen will generate a graph for
2129# each documented class showing the direct and indirect inheritance relations.
2130# Setting this tag to YES will force the CLASS_DIAGRAMS tag to NO.
2131# The default value is: YES.
2132# This tag requires that the tag HAVE_DOT is set to YES.
2133
2134CLASS_GRAPH = YES
2135
2136# If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
2137# graph for each documented class showing the direct and indirect implementation
2138# dependencies (inheritance, containment, and class references variables) of the
2139# class with other documented classes.
2140# The default value is: YES.
2141# This tag requires that the tag HAVE_DOT is set to YES.
2142
2143COLLABORATION_GRAPH = YES
2144
2145# If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
2146# groups, showing the direct groups dependencies.
2147# The default value is: YES.
2148# This tag requires that the tag HAVE_DOT is set to YES.
2149
2150GROUP_GRAPHS = YES
2151
2152# If the UML_LOOK tag is set to YES doxygen will generate inheritance and
2153# collaboration diagrams in a style similar to the OMG's Unified Modeling
2154# Language.
2155# The default value is: NO.
2156# This tag requires that the tag HAVE_DOT is set to YES.
2157
2158UML_LOOK = NO
2159
2160# If the UML_LOOK tag is enabled, the fields and methods are shown inside the
2161# class node. If there are many fields or methods and many nodes the graph may
2162# become too big to be useful. The UML_LIMIT_NUM_FIELDS threshold limits the
2163# number of items for each type to make the size more manageable. Set this to 0
2164# for no limit. Note that the threshold may be exceeded by 50% before the limit
2165# is enforced. So when you set the threshold to 10, up to 15 fields may appear,
2166# but if the number exceeds 15, the total amount of fields shown is limited to
2167# 10.
2168# Minimum value: 0, maximum value: 100, default value: 10.
2169# This tag requires that the tag HAVE_DOT is set to YES.
2170
2171UML_LIMIT_NUM_FIELDS = 10
2172
2173# If the TEMPLATE_RELATIONS tag is set to YES then the inheritance and
2174# collaboration graphs will show the relations between templates and their
2175# instances.
2176# The default value is: NO.
2177# This tag requires that the tag HAVE_DOT is set to YES.
2178
2179TEMPLATE_RELATIONS = NO
2180
2181# If the INCLUDE_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are set to
2182# YES then doxygen will generate a graph for each documented file showing the
2183# direct and indirect include dependencies of the file with other documented
2184# files.
2185# The default value is: YES.
2186# This tag requires that the tag HAVE_DOT is set to YES.
2187
2188INCLUDE_GRAPH = YES
2189
2190# If the INCLUDED_BY_GRAPH, ENABLE_PREPROCESSING and SEARCH_INCLUDES tags are
2191# set to YES then doxygen will generate a graph for each documented file showing
2192# the direct and indirect include dependencies of the file with other documented
2193# files.
2194# The default value is: YES.
2195# This tag requires that the tag HAVE_DOT is set to YES.
2196
2197INCLUDED_BY_GRAPH = YES
2198
2199# If the CALL_GRAPH tag is set to YES then doxygen will generate a call
2200# dependency graph for every global function or class method.
2201#
2202# Note that enabling this option will significantly increase the time of a run.
2203# So in most cases it will be better to enable call graphs for selected
2204# functions only using the \callgraph command.
2205# The default value is: NO.
2206# This tag requires that the tag HAVE_DOT is set to YES.
2207
2208CALL_GRAPH = NO
2209
2210# If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
2211# dependency graph for every global function or class method.
2212#
2213# Note that enabling this option will significantly increase the time of a run.
2214# So in most cases it will be better to enable caller graphs for selected
2215# functions only using the \callergraph command.
2216# The default value is: NO.
2217# This tag requires that the tag HAVE_DOT is set to YES.
2218
2219CALLER_GRAPH = NO
2220
2221# If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
2222# hierarchy of all classes instead of a textual one.
2223# The default value is: YES.
2224# This tag requires that the tag HAVE_DOT is set to YES.
2225
2226GRAPHICAL_HIERARCHY = YES
2227
2228# If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
2229# dependencies a directory has on other directories in a graphical way. The
2230# dependency relations are determined by the #include relations between the
2231# files in the directories.
2232# The default value is: YES.
2233# This tag requires that the tag HAVE_DOT is set to YES.
2234
2235DIRECTORY_GRAPH = YES
2236
2237# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images
2238# generated by dot.
2239# Note: If you choose svg you need to set HTML_FILE_EXTENSION to xhtml in order
2240# to make the SVG files visible in IE 9+ (other browsers do not have this
2241# requirement).
2242# Possible values are: png, png:cairo, png:cairo:cairo, png:cairo:gd, png:gd,
2243# png:gd:gd, jpg, jpg:cairo, jpg:cairo:gd, jpg:gd, jpg:gd:gd, gif, gif:cairo,
2244# gif:cairo:gd, gif:gd, gif:gd:gd and svg.
2245# The default value is: png.
2246# This tag requires that the tag HAVE_DOT is set to YES.
2247
2248DOT_IMAGE_FORMAT = png
2249
2250# If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to
2251# enable generation of interactive SVG images that allow zooming and panning.
2252#
2253# Note that this requires a modern browser other than Internet Explorer. Tested
2254# and working are Firefox, Chrome, Safari, and Opera.
2255# Note: For IE 9+ you need to set HTML_FILE_EXTENSION to xhtml in order to make
2256# the SVG files visible. Older versions of IE do not have SVG support.
2257# The default value is: NO.
2258# This tag requires that the tag HAVE_DOT is set to YES.
2259
2260INTERACTIVE_SVG = NO
2261
2262# The DOT_PATH tag can be used to specify the path where the dot tool can be
2263# found. If left blank, it is assumed the dot tool can be found in the path.
2264# This tag requires that the tag HAVE_DOT is set to YES.
2265
2266DOT_PATH =
2267
2268# The DOTFILE_DIRS tag can be used to specify one or more directories that
2269# contain dot files that are included in the documentation (see the \dotfile
2270# command).
2271# This tag requires that the tag HAVE_DOT is set to YES.
2272
2273DOTFILE_DIRS =
2274
2275# The MSCFILE_DIRS tag can be used to specify one or more directories that
2276# contain msc files that are included in the documentation (see the \mscfile
2277# command).
2278
2279MSCFILE_DIRS =
2280
2281# The DIAFILE_DIRS tag can be used to specify one or more directories that
2282# contain dia files that are included in the documentation (see the \diafile
2283# command).
2284
2285DIAFILE_DIRS =
2286
2287# When using plantuml, the PLANTUML_JAR_PATH tag should be used to specify the
2288# path where java can find the plantuml.jar file. If left blank, it is assumed
2289# PlantUML is not used or called during a preprocessing step. Doxygen will
2290# generate a warning when it encounters a \startuml command in this case and
2291# will not generate output for the diagram.
2292# This tag requires that the tag HAVE_DOT is set to YES.
2293
2294PLANTUML_JAR_PATH =
2295
2296# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of nodes
2297# that will be shown in the graph. If the number of nodes in a graph becomes
2298# larger than this value, doxygen will truncate the graph, which is visualized
2299# by representing a node as a red box. Note that doxygen if the number of direct
2300# children of the root node in a graph is already larger than
2301# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note that
2302# the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.
2303# Minimum value: 0, maximum value: 10000, default value: 50.
2304# This tag requires that the tag HAVE_DOT is set to YES.
2305
2306DOT_GRAPH_MAX_NODES = 50
2307
2308# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the graphs
2309# generated by dot. A depth value of 3 means that only nodes reachable from the
2310# root by following a path via at most 3 edges will be shown. Nodes that lay
2311# further from the root node will be omitted. Note that setting this option to 1
2312# or 2 may greatly reduce the computation time needed for large code bases. Also
2313# note that the size of a graph can be further restricted by
2314# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.
2315# Minimum value: 0, maximum value: 1000, default value: 0.
2316# This tag requires that the tag HAVE_DOT is set to YES.
2317
2318MAX_DOT_GRAPH_DEPTH = 0
2319
2320# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent
2321# background. This is disabled by default, because dot on Windows does not seem
2322# to support this out of the box.
2323#
2324# Warning: Depending on the platform used, enabling this option may lead to
2325# badly anti-aliased labels on the edges of a graph (i.e. they become hard to
2326# read).
2327# The default value is: NO.
2328# This tag requires that the tag HAVE_DOT is set to YES.
2329
2330DOT_TRANSPARENT = NO
2331
2332# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output
2333# files in one run (i.e. multiple -o and -T options on the command line). This
2334# makes dot run faster, but since only newer versions of dot (>1.8.10) support
2335# this, this feature is disabled by default.
2336# The default value is: NO.
2337# This tag requires that the tag HAVE_DOT is set to YES.
2338
2339DOT_MULTI_TARGETS = YES
2340
2341# If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
2342# explaining the meaning of the various boxes and arrows in the dot generated
2343# graphs.
2344# The default value is: YES.
2345# This tag requires that the tag HAVE_DOT is set to YES.
2346
2347GENERATE_LEGEND = YES
2348
2349# If the DOT_CLEANUP tag is set to YES doxygen will remove the intermediate dot
2350# files that are used to generate the various graphs.
2351# The default value is: YES.
2352# This tag requires that the tag HAVE_DOT is set to YES.
2353
2354DOT_CLEANUP = YES
Note: See TracBrowser for help on using the repository browser.